Ricoh SP 377SFNWX - 2 Paper Specifications and Adding Paper; Workflow for Loading Paper and Configuring Paper Sizes and Types

2. Paper Specifications and Adding
Paper
This chapter describes how to load paper and originals and about their specifications.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and operations required after paper is loaded.
After following the procedures below, you can copy or print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
DSG260
For details about the procedures, refer to the next page.
Procedure Reference
See page 36 "Loading Paper".
There are three ways to specify the paper type and size.
• When using the control panel
See page 45 "Specifying Paper Type and Paper Size Using the
Control Panel".
• When using Web Image Monitor
See page 50 "Specifying Paper Type and Paper Size Using Web
Image Monitor".
• When using Smart Organizing Monitor
See page 48 "Specifying Paper Type and Paper Size Using Smart
Organizing Monitor".
See page 51 "Specifying Paper Type and Paper Size Using the Printer
Driver".
For details about supported paper, see page 53 "Supported Paper".
35