Basic Operation of Copying
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
1. Press the [Copy] key.
2. Place the original on the exposure glass or in the ADF.
To place the original, see page 65 "Placing Originals". If necessary, configure advanced
photocopy settings.
3. To make multiple copies, enter the number of copies using the number keys.
4. Press the [Start] key.
• The maximum number of copies is 99.
• You can change the paper tray for the current job by pressing the [ ] or [ ] key. You can also
select to change the paper tray automatically according to the paper size (A4, Letter, or 16K).
• You can select the paper tray for printing out copies in [Select Paper] under [Copier Features]. If
you set the machine to switch between tray 1 and the bypass tray automatically depending on the
paper size in this setting, you can also specify the tray the machine uses first in [Paper Tray Priority]
Basic Operation of Copying
77
To Next Page
Loading...
