Configuring the System Settings
Click [System Settings] to display the page for configuring the system settings.
This page contains the following tabs: [Sound Volume Adjustment] (only SP 320SFN and SP
377SFNwX), [Tray Paper Settings], [Copier], [Fax], [Priority Tray], [Toner Management], [Interface],
and [Shortcut to Function].
Sound Volume Adjustment Tab (only SP 320SFN and SP 377SFNwX)
Sound Volume Adjustment
Item Description
Panel Key Sound Select the volume of the beep that sounds when a key is pressed from [Off],
[Low], [Middle], or [High].
Ring Volume Select the volume of the sound when the machine is set to ring from [Off],
[Low], [Middle], or [High].
On Hook Mode Select the volume of the sound from the speaker during on hook mode from
[Off], [Low], [Middle], or [High].
Job End Tone Select the volume of the beep that sounds when a job is complete from
[Off], [Low], [Middle], or [High].
Job Error Tone Select the volume of the beep that sounds when a fax transmission error
occurs from [Off], [Low], [Middle], or [High].
Alarm Volume Select the volume of the alarm that sounds when an operation error occurs
from [Off], [Low], [Middle], or [High].
Tray Paper Settings Tab
Tray 1
Item Description
Paper Size Select the paper size for tray 1 from the following:
A4 (210 × 297 mm), Letter (8.5 × 11), B5 (182 × 257 mm), B6 (128 ×
182 mm), A5 (210 × 148 mm), A5 (148 x 210 mm), A6 (105× 148 mm),
Legal (8.5 × 14), 8.5 × 13, 8.5 × 13.4, 8.5 × 13.6, 16K, 8.11 × 13.3,
5.5 × 8.5, Custom Size
8. Configuring the Machine Using Utilities
228
To Next Page
Loading...
