[Black and White Photo]
[Color Document-Faster]
[Color Document-Better Quality]
[Custom...]
• When using the ADF (only SP 320SFN, SP 377SNwX, and SP 377SFNwX):
[ADF-Faster]
[ADF-Better]
[ADF-Gray]
[Custom...]
3. Scn. Mode:
Select from full color, grayscale, or black-and-white.
4. Resolution:
Select a resolution from the list. Note that increasing the resolution also increases the file size and
scanning time.
Select from 100, 200, 300, or 600 dpi.
5. Size:
Select the scanning size.
When [Exposure Glass] is selected in [Original:], you can change the scanning size with your mouse in
the preview area. Also, after selecting [User defined], you can select the unit of measure from [cm],
[inches], or [pixels].
6. Duplex (only SP 320SFN, SP 377SNwX, and SP 377SFNwX)
Appears only when [Automatic Document Feeder] is selected in [Original:]. Select the check box when
scanning both sides of the original, and then specify the orientation.
Scanning from Smart Organizing Monitor
125
To Next Page
Loading...
