Ricoh SP 4510 DN - Page 115

Problem Causes Solutions
Some characters are not
printed or appear strange.
The printer driver settings are not
configured correctly.
PCL 5e/5c:
On the printer driver's [Print
Quality] tab, select [600 dpi]
in the "Resolution" area.
PCL 6:
• On the printer driver's
[Detailed Settings] tab,
click [Print Quality] in
"Menu:", and then select
[Quality] in the "Print
Priority:" list.
• On the printer driver's
[Detailed Settings] tab,
click [Print Quality] in
"Menu:", and then select
[Raster] in the "Vector/
Raster:" list.
PostScript 3:
On the printer driver's
[Detailed Settings] tab, click
[Print Quality] in "Menu:", and
then select [Text] in the
"Dithering:" list.
For details about the printer
driver settings, see the printer
driver Help.
Print speed or application
relinquishing speed is slow.
The printer driver settings are not
configured correctly.
PCL 6
On the printer driver's
[Detailed Settings] tab,
click [Print Quality] in
"Menu:", and then select
[Speed] in the "Print
Priority:" list.
For details about the printer
driver settings, see the printer
driver Help.
Quit any other applications.
Other Printing Problems
113