Paper Size Specifications
The following tables show the paper sizes that can be loaded in each paper tray. The "Paper size"
column shows the names of paper sizes and their dimensions in millimeters and inches. The and
icons indicate the paper orientation in relation to the printer body.
The letters in the tables indicate the following:
• A: Select the paper size using the control panel.
• B: Select the paper size using the paper size dial on the tray.
• C: Set the paper size dial on the tray to " ", and select the paper size with the control panel.
• : You can print on both sides of paper.
• -: Not supported
Metric sizes
Paper size name Actual size Two-sided Bypass tray Tray 1 Trays 2, 3
A4 210 × 297 mm A B B
A5
*
148 × 210 mm A B B
A5 148 × 210 mm A C C
A6 105 × 148 mm A B B
B5 182 × 257 mm A C C
B6 128 × 182 mm A C C
B6 128 × 182 mm - A - -
C5 Env 162 × 229 mm - A C -
C6 Env 114 × 162 mm - A C -
DL Env 110 × 220 mm - A C -
16K 195 × 267 mm A C C
*
While a print job is performed on paper that is loaded vertically, smearing may occur near the edges of the
printed paper. If this happens, set the paper horizontally and print again.
Imperial sizes
Paper size name Actual size Two-sided Bypass tray Tray 1 Trays 2, 3
8
1
/
2
× 14 8.5" × 14" A B B
2. Loading Paper
38
To Next Page
Loading...
Need help?
General
