Ricoh SP 4510 DN User Manual

2. Click the [Paper] tab, and then configure the following settings:
• Input Tray:
Select the paper tray where the envelopes are loaded.
• Document Size:
Select the envelope size.
• Type:
Select [Envelope].
Change any other print settings as necessary. For details, see the printer driver's Help.
3. Click [OK].
4. Start printing from the application's [Print] dialog box.
• Configure the paper settings appropriately using both the printer driver and the control panel. For
details about settings using the control panel, see page 62 "Configuring Envelope Settings Using
the Control Panel".
• Envelopes must be loaded in a specific orientation. For details, see page 55 "Specifications of
Envelopes".
Printing on Envelopes with Mac OS X
1. After creating a document, open the [Printing Preferences] dialog box in the document's
native application.
2. Configure the following settings:
• Two-Sided:
Clear the check box.
• Paper Size:
Select the envelope size.
• Orientation:
Select the orientation of the envelope.
3. Select [Paper Feed] in the pop-up menu.
4. Select the paper tray where the envelopes are loaded.
5. Select [Printer Features] in the pop-up menu.
2. Loading Paper
58

Ricoh SP 4510 DN Specifications

General

Print Technology	Laser
Resolution	1200 x 1200 dpi
Maximum Paper Capacity	1, 600 sheets
Duplex Printing	Yes
Memory	512 MB
Monthly Duty Cycle	150, 000 pages
Maximum Paper Size	A4
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, A6, B5, B6, Letter, Legal, Executive
PDL	PCL6, PostScript 3
Operating System Compatibility	Windows, Mac, Linux
Paper Capacity	600 sheets (1 x 500-sheet tray + 100-sheet bypass tray)