Ricoh SP C262SFNw User Manual

4. Place the original in the upper-left corner of the exposure glass.
DUE241
5. Press the [B&W Start] key or [Color Start] key.
DUE312
A message prompting you to place the original back side down on the exposure glass appears on
the display.
6. Place the original on the exposure glass with the back side faced down and with the top
to the rear of the machine within the time specified in [System Reset Timer], and then
press [Start].
Use the same mode (color or black-and-white) for both sides.
• For the ID card copy function, you can set the machine to print a line in the middle of the printed
paper. Specify [ID Card Center Line] under [Copier Features].
• You can change the scanning size for the ID card function. Specify [ID Card Size] under [Copier
Features].
• After you load the originals, press the [B&W Start] key or [Color Start] key within the time specified
in [System Reset Timer]. Otherwise, the job is canceled. For details, see page 257 "Administrator
Tools Settings".
• Regardless of the machine's reduction or enlargement ratio setting, an ID card copy will always be
made at 100%.
• Temporary job settings are cleared in the following cases:
4. Copying Originals
122

Ricoh SP C262SFNw Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
AirPrint Enabled	Yes
Max Copying Resolution	600 x 600 dpi
Scanning Resolution	1200 x 1200 dpi
Fax Transmission Speed	33.6 kbps
Standard Media Capacity	250 sheets
Output Trays Capacity	150 sheets
Max Printing Speed	21 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Network Connectivity	Ethernet, Wi-Fi
USB Connectivity	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	29 kg
Print Speed	21 ppm (pages per minute)
Connectivity	Ethernet, USB, Wi-Fi
Media Type	Envelopes, plain paper, labels