EasyManuals Logo

Ricoh SP C262SFNw User Manual

Ricoh SP C262SFNw
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #382 background imageLoading...
Page #382 background image
Copier Problems
When You Cannot Make Clear Copies
Problem Solution
The printed copy is blank. The original is not placed correctly.
When using the exposure glass, place originals copy side
down. When using the ADF, place them copy side up. See
page 79 "Placing Originals".
The wrong original was copied. If copying from the exposure glass, make sure that there are
no originals in the ADF.
Copied pages do not look the same
as the originals.
Select the correct scan mode according to the type of original.
See page 124 "Specifying Scan Settings for Copying"
Black spots appear when
photocopying a photographic print.
The original may have stuck to the exposure glass due to high
humidity.
Place the original on the exposure glass, and then place two
or three sheets of white paper on top of it. Leave the ADF open
when copying.
A moire pattern is produced. The original probably has heavily lined or dotted areas.
Switching the setting for image quality between [Photo] and
[Text/Photo] may eliminate the moire pattern.
See page 172 "Specifying Scan Settings for Scanning".
The printed copy is dirty. Image density is too high.
Adjust the image density. See page 172 "Specifying
Scan Settings for Scanning".
Toner on the printed surface is not dry.
Do not touch printed surfaces immediately after copying.
Remove freshly printed sheets one by one, taking care
not to touch printed areas.
The exposure glass or ADF is dirty. See page 317
"Maintaining the Machine".
Before placing originals on the exposure glass, make
sure that toner or correction fluid is dry.
10. Troubleshooting
380

Table of Contents

Other manuals for Ricoh SP C262SFNw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP C262SFNw and is the answer not in the manual?

Ricoh SP C262SFNw Specifications

General IconGeneral
Print TechnologyLaser
Duplex PrintingYes
Paper Input Capacity250 sheets
Scanner TypeFlatbed, ADF
ADF Capacity50 sheets
FunctionsPrint, Copy, Scan, Fax
AirPrint EnabledYes
Max Copying Resolution600 x 600 dpi
Scanning Resolution1200 x 1200 dpi
Fax Transmission Speed33.6 kbps
Standard Media Capacity250 sheets
Output Trays Capacity150 sheets
Max Printing Speed21 ppm
Copy Resolution600 x 600 dpi
Scan Resolution1200 x 1200 dpi
Network ConnectivityEthernet, Wi-Fi
USB ConnectivityYes
Mobile PrintingYes
Operating System CompatibilityWindows, Mac OS, Linux
Weight29 kg
Print Speed21 ppm (pages per minute)
ConnectivityEthernet, USB, Wi-Fi
Media TypeEnvelopes, plain paper, labels

Related product manuals