Ricoh SP C262SFNw User Manual

2. Disconnect the USB cable from the machine.
Make sure to close the cover of the USB flash disk port after use.
When PictBridge Printing Does Not Work
This section explains likely causes and possible solutions for problems that can occur during PictBridge
printing.
Problem Cause Solution
PictBridge is not available. There is a problem with the USB
connection or the PictBridge
settings.
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
You have connected multiple
digital cameras.
Connect one digital camera
only.
Do not connect multiple
cameras.
Cannot print. The specified number of prints
exceeds the maximum number
that can be printed at a time.
The maximum specifiable print
quantity at a time is 999.
Change the quantity to 999 or
less, and then retry printing.
Direct Printing from a Digital Camera (PictBridge)
97

Ricoh SP C262SFNw Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
AirPrint Enabled	Yes
Max Copying Resolution	600 x 600 dpi
Scanning Resolution	1200 x 1200 dpi
Fax Transmission Speed	33.6 kbps
Standard Media Capacity	250 sheets
Output Trays Capacity	150 sheets
Max Printing Speed	21 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Network Connectivity	Ethernet, Wi-Fi
USB Connectivity	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	29 kg
Print Speed	21 ppm (pages per minute)
Connectivity	Ethernet, USB, Wi-Fi
Media Type	Envelopes, plain paper, labels