EasyManuals Logo

Ricoh SP C262SFNw User Manual

Ricoh SP C262SFNw
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #368 background imageLoading...
Page #368 background image
Problem Solution
Multiple sheets of paper are fed at
one time.
Fan the paper well before loading. Also make sure that
the edges are even by tapping the stack on a flat surface
such as a desk.
Make sure that the side or end fences are in the right
position.
Use supported types of paper. See page 65 "Supported
Paper".
Load paper only as high as the upper limit markings on
the side fence..
Make sure that the friction pads and paper feed rollers
are clean.
Check that paper was not added while there was still
some left in the tray. Only add paper when there is none
left in the tray.
Paper gets wrinkles. Paper is damp. Use paper that has been stored properly.
See page 65 "Supported Paper".
Paper is too thin. See page 65 "Supported Paper".
If there are gaps between the paper and the side or end
fences of the paper tray, or the paper guides of the
bypass tray, adjust the side or end fences of the paper
tray, or the paper guides of the bypass tray to remove the
gaps.
Check that both the left and right fusing unit levers have
been raised to the plain paper mark.
The printed paper is curled. Load the paper upside down in the paper tray.
If the paper curl is severe, take prints from the output tray
more frequently.
Paper is damp. Use paper that has been stored properly.
See page 65 "Supported Paper".
Select [Level 2: Medium] or [Level 3: Strong] in [Anti-
Humidity Level] under [System Settings]. Note that if you
select [Level 2: Medium] or [Level 3: Strong], the first
print takes longer than subsequent prints.
10. Troubleshooting
366

Table of Contents

Other manuals for Ricoh SP C262SFNw

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh SP C262SFNw and is the answer not in the manual?

Ricoh SP C262SFNw Specifications

General IconGeneral
Print TechnologyLaser
Duplex PrintingYes
Paper Input Capacity250 sheets
Scanner TypeFlatbed, ADF
ADF Capacity50 sheets
FunctionsPrint, Copy, Scan, Fax
AirPrint EnabledYes
Max Copying Resolution600 x 600 dpi
Scanning Resolution1200 x 1200 dpi
Fax Transmission Speed33.6 kbps
Standard Media Capacity250 sheets
Output Trays Capacity150 sheets
Max Printing Speed21 ppm
Copy Resolution600 x 600 dpi
Scan Resolution1200 x 1200 dpi
Network ConnectivityEthernet, Wi-Fi
USB ConnectivityYes
Mobile PrintingYes
Operating System CompatibilityWindows, Mac OS, Linux
Weight29 kg
Print Speed21 ppm (pages per minute)
ConnectivityEthernet, USB, Wi-Fi
Media TypeEnvelopes, plain paper, labels

Related product manuals