Ricoh SP C262SFNw User Manual

Problem Solution
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
When You Cannot Make Copies as Wanted
Problem Solution
Photocopied pages are not in
correct order.
On the control panel, change the [Sort] setting under copy
settings to collate pages as you require. For details about
[Sort], see page 223 "Copier Features Settings".
Copied pages are too dark or too
light.
Adjust the image density. See page 172 "Specifying Scan
Settings for Scanning".
Cannot make copies with
satisfactory tones.
Adjust the tone in [Color Adjustment] in Copier Features. You
can adjust the intensity of red, green and blue. See page 223
"Copier Features Settings".
Copier Problems
381

Ricoh SP C262SFNw Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
AirPrint Enabled	Yes
Max Copying Resolution	600 x 600 dpi
Scanning Resolution	1200 x 1200 dpi
Fax Transmission Speed	33.6 kbps
Standard Media Capacity	250 sheets
Output Trays Capacity	150 sheets
Max Printing Speed	21 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Network Connectivity	Ethernet, Wi-Fi
USB Connectivity	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	29 kg
Print Speed	21 ppm (pages per minute)
Connectivity	Ethernet, USB, Wi-Fi
Media Type	Envelopes, plain paper, labels