If you see this screen, proceed to the next step.
8. If you have more originals to scan, place the next original on the exposure glass, and
then press [Yes]. Repeat this step until all originals are scanned.
9. When all originals have been scanned, press [No] to start sending the scanned file.
• To cancel scanning, press the [Clear/Stop] key. The scan files are discarded.
• You can also specify a destination using [Resend]. For details, see page 153 "Specifying the Scan
Destination Using [Resend]".
5. Scanning Originals
152
To Next Page
Loading...
