Ricoh SP C262SFNw User Manual

Using the WPS Button
A router (access point) is needed to set up a connection.
Before doing the following procedure, install the printer driver according to the procedure on page 398
"Installing the Printer Driver".
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
2. Press the [Home] key.
DUE302
3. Press the [Setting] icon on the [Home] screen.
4. Press [Network Settings].
5. If you are requested to enter a password, enter the password using the number keys,
and then press [OK].
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
6. Press [Wi-Fi Enable].
7. Press [Enable].
8. Turn off the machine, and then turn it back on.
9. Press the wireless LAN icon.
10. Press [WPS].
11. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK].
A password for accessing the [Wi-Fi Configuration] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
12. Press [PBC].
13. Press [Connect].
"Please wait for 2 minutes" appears, and the machine starts to connect in PBC method.
11. Configuring Network Settings Using OS X
400

Ricoh SP C262SFNw Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
AirPrint Enabled	Yes
Max Copying Resolution	600 x 600 dpi
Scanning Resolution	1200 x 1200 dpi
Fax Transmission Speed	33.6 kbps
Standard Media Capacity	250 sheets
Output Trays Capacity	150 sheets
Max Printing Speed	21 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Network Connectivity	Ethernet, Wi-Fi
USB Connectivity	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	29 kg
Print Speed	21 ppm (pages per minute)
Connectivity	Ethernet, USB, Wi-Fi
Media Type	Envelopes, plain paper, labels