Ricoh SP C262SFNw User Manual

Specifying Paper Type and Paper Size Using
the Control Panel
This section describes how to specify the paper size and paper type using the control panel.
• Paper type and size can also be specified using the printer driver. For details, see the printer driver
Help.
• For prints from the bypass tray or Tray 1, you can select to print according to either the printer
driver settings or the control panel settings with [Bypass Tray Priority] under [Paper Settings]. For
details about [Bypass Tray Priority], see page 252 "Paper Settings".
• If [Auto Continue] under [System Settings] is enabled, printing stops temporarily if a paper type/
size error is detected. The printing restarts automatically with the settings made with the control
panel after about ten seconds. For details about [Auto Continue], see page 240 "System Settings".
Specifying the Paper Type
This section describes how to specify the paper type.
1. Press the [Home] key.
DUE302
2. Press the [Setting] icon on the [Home] screen.
3. Press [Paper Settings].
4. Select the tray for which you want to specify the paper type.
5. Select the desired paper type.
6. Press the [Home] key.
Specifying Paper Type and Paper Size Using the Control Panel
59

Ricoh SP C262SFNw Specifications

General

Print Technology	Laser
Duplex Printing	Yes
Paper Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
AirPrint Enabled	Yes
Max Copying Resolution	600 x 600 dpi
Scanning Resolution	1200 x 1200 dpi
Fax Transmission Speed	33.6 kbps
Standard Media Capacity	250 sheets
Output Trays Capacity	150 sheets
Max Printing Speed	21 ppm
Copy Resolution	600 x 600 dpi
Scan Resolution	1200 x 1200 dpi
Network Connectivity	Ethernet, Wi-Fi
USB Connectivity	Yes
Mobile Printing	Yes
Operating System Compatibility	Windows, Mac OS, Linux
Weight	29 kg
Print Speed	21 ppm (pages per minute)
Connectivity	Ethernet, USB, Wi-Fi
Media Type	Envelopes, plain paper, labels