2. Slide both sides of the paper guide outward, and then load paper print side down until it
stops.
3. Adjust both sides of the paper guide to match the paper width.
• When using the bypass tray, it is recommended that you set the paper direction to .
• Letterhead paper must be loaded in a specific orientation. For details, see page 34 "Loading
Orientation-Fixed Paper or Two-Sided Paper".
• You can load envelopes into the bypass tray. Envelopes must be loaded in a specific orientation.
For details, see page 36 "Loading Envelopes".
Loading Paper into the Bypass Tray
33
To Next Page
Loading...
