If USB Connection Fails
Problem Causes Solutions
The printer is not
automatically recognized.
The USB cable is not
connected properly.
Disconnect the USB cable, turn off the
printer, and then turn it on again. When
the printer has fully booted up, reconnect
the USB cable.
The printer is not
automatically recognized.
Windows has already
configured the USB
settings.
Check whether or not the computer has
identified the printer as an unsupported
device.
Open Windows' Device Manager, and
then, under [Universal Serial Bus
controllers], remove any conflicting
devices. A [!] or [?] icon is displayed for
conflicting devices. Take care not to
accidentally remove required devices.
For details, see Windows Help.
If USB Connection Fails
69
To Next Page
Loading...
