Input Paper Sizes Envelope Feeder Unit
The following paper size is supported but the paper size should be set with the control panel.
There is no dial on the tray.
Metric version / Inch version
Com#10 Env. , C5 Env. , C6 Env. , DL Env. , Monarch Env.
See p.96 "Loading Paper".
Paper Weight and Number of Sheets to Be Set
Supported paper weight
Maximum number of sheets
(plain paper)
Tray 1 60 - 216 g/m
2
(16 - 57 lb.) 500 (75 g/m
2
, 20 lb.)
Bypass Tray 52 - 216 g/m
2
(14 - 57 lb.) 100 (75 g/m
2
, 20 lb.)
For other kind of papers, see
p.88 "Types of Paper and
Other Media".
Paper Feed Unit (Tray 2, Tray
3)
60 - 216 g/m
2
(16 - 57 lb.) 500 (75 g/m
2
, 20 lb.)
Envelope Feeder See p.96 "Loading Paper".
Check that the top of the stack is not higher than the limit mark inside the tray.
Paper Size Supported by Both Side Printing
The following paper sizes can be printed on both sides:
Metric version / Inch version
A3 , B4 JIS , A4 , B5 JIS , A5 , 8K , 16K , 11" × 17" , 8
1
/
2
" × 14" (Legal) ,
8
1
/
2
" × 13" (Foolscap) , 8
1
/
2
" × 11" (Letter) , 8
1
/
4
" × 13" (Folio) , 8" × 13" (F/GL) ,
5
1
/
2
" × 8
1
/
2
" (Half Letter)
• The envelope feeder unit requires the installation of the optional paper feed unit.
• Custom paper size is not supported by both sides printing.
• JIS stands for "Japanese Industrial Standard".
Supported Paper for Each Tray
87
To Next Page
Loading...
