Value Behavior
10 (Maximum) • When black-and-white printing is performed after full color printing, full
color mode switches to black-and-white mode after 10 black-and-white
sheets are printed in full color mode.
• When black-and-white printing is performed after special color printing,
special color mode switches to black-and-white mode after 10 black-
and-white sheets are printed in special color mode.
• When full color printing is performed after special color printing, special
color mode switches to full color mode after 10 full color sheets are
printed in special color mode.
• If black-and-white printing is performed in full-color mode, cyan, magenta, and yellow
development units are used for black-and-white printing, so that the Photoconductor unit needs to
be replaced in a shorter period of time.
• If black-and-white printing is performed in special color mode, the special color development units
are used for black-and-white printing, so that the Photoconductor unit needs to be replaced in a
shorter period of time.
• When black-and-white printing is performed after full color printing, full color mode is always
enabled as color printing cannot be performed in black-and-white mode.
• When special color printing is performed after black-and-white printing, special color mode is
always enabled as color printing cannot be performed in black-and-white mode.
• Special color mode is available for Pro C7200X, Pro C7210X, Pro C7200SX, and Pro C7210SX.
10. Improving Throughput
160
To Next Page
Loading...
Need help?
General
