Ring Binding
• Be sure not to exit from Energy Saver mode or to switch the machine on when the ring binder door
is open and the binding unit is disconnected. Doing so will affect initialization, causing the ring
binder function to become unavailable (although other functions will be unaffected).
• If you inadvertently do this, connect the ring binder's binding unit again, close the door, and then
turn the power off and back on to restore normal operation.
SC756-48 Appears
Cause:
This may occur if the machine recovers from Energy Saver mode or the power is turned on while the ring
binder tray is pulled out.
Solution:
1. Push the ring binder tray in.
2. Close the cover.
3. Turn the machine on.
4. If the problem persists, contact your service representative.
9. Post-Processing Option Troubleshooting
148
To Next Page
Loading...
