RiCOMA (Shenzhen) Co.,Ltd
A Passion for Excellence Visit us at
Add.: Building B, ShenChangGang Science Park, Jinlong Road 1, Baolong Industrial Town,
Longgang District, Shenzhen, P.R.C
Tel.:+86-0755-25857576 Fax: +86-0755-25857773 - 20 -
www.ricoma.cn
5. Operational Control of Background Software
Click on
before start , check the running condition of background
program, and terminate running of unnecessary program to ensure the normal operation
of embroidery software, with interface shown as follows:
6. Touch screen calibration:
If screen is not sensitive to touch, multipoint calibration can be conducted to the screen,
normally the four-point calibration with method as follows: click on
To Next Page
Loading...
