RiCOMA (Shenzhen) Co.,Ltd
A Passion for Excellence Visit us at
Add.: Building B, ShenChangGang Science Park, Jinlong Road 1, Baolong Industrial Town,
Longgang District, Shenzhen, P.R.C
Tel.:+86-0755-25857576 Fax: +86-0755-25857773 - 14 -
www.ricoma.cn
Undercarriage type: It means the lifting mode of undercarriage, with default
status Yes，no real setting meaning;
Thread cut switch: With default status Yes，meaning start the thread cut
function;
Thread break backward stitches: With default value 4 and setting range 0-9
stitches;
Note: after setting, click on OK to save before quit. If any uncertainty about
setting, you can restore the default setting by clicking on
.
3. Frame parameter setting:
Click on
before start , enter the frame parameter setting interface, as
shown below:
To Next Page
