RiCOMA (Shenzhen) Co.,Ltd
A Passion for Excellence Visit us at
Add.: Building B, ShenChangGang Science Park, Jinlong Road 1, Baolong Industrial Town,
Longgang District, Shenzhen, P.R.C
Tel.:+86-0755-25857576 Fax: +86-0755-25857773 - 28 -
www.ricoma.cn
Caution
In any time, embroidery machine have to be operated under the READY status.
1. When machine status bar displaying
, please loosen the
emergency stop switch to resume normal operation;
2. When status bar displays
after the startup of machine,
please check the connection condition of USB connecting wire, and replug wire before
close the software. Tips in “4, Network Setting”of “IV Function Introduction”for
reference;
3. If status bar displays
during the running process of
machine, please check USB connection and if any equipment with strong vibration or
high power in operation round the USB. After removing those external interferences,
reconnect USB connecting wire, close software and restart it. Tips in “4, Network
Setting”of “IV Function Introduction”for reference;
4. Removing the stitch position error:
When circumstances shown as follows (see next picture) occur, it means that needle
position have not been effectively detected. Click on pop-up error prompt message,
slowly revolve color switching handle, and after a digit appears in the needle position,
indicating the needle position have been effectively detected and trouble removed,
abnormal operation then will be allowed.
To Next Page
Loading...
