Translation of the Original ENGLISH TRANSPORT AND STORAGE
454522.68.07-01-E
21
27.06.2012
4.3 Transport Using a Lift Truck
Handling the unit from the narrow side:
The P030 Chiller can be moved with a lift truck with the forks being inserted under the load from the
narrow side. To ensure that the forks can be inserted under both cross beams, a minimum fork
length must be maintained.
Caution!
• The lifting rate should be kept to a minimum!
Handling the unit from the broadside:
The forks of the lift truck must extend all the way through the unit, the fork rollers must project from
the other side of the unit. Only then may the P030 Chiller be lifted; exercise care to prevent the load
from becoming off-centred.
Caution!
• The lifting rate should be kept to a minimum!
The P030 Chiller can be moved with a lift truck with the forks being inserted under the load beneath
the recesses, from the broadside, symmetrically to the centre of gravity.
Transport Using a Lift Truck
To Next Page
Loading...