Translation of the Original ENGLISH FOR YOUR SAFETY
454522.68.07-01-E
7
27.06.2012
1.3 Safety Notices
For the installation, operation and maintenance of the P030 Chiller the following regulations and
safety notices have to be observed:
Danger!
• Any work on the P030 Chiller may only be performed by qualified personnel.
• All relevant accident prevention regulations have to be observed.
• Do not allow anybody to stand or pass underneath the forks when lifting and
setting down the P030 Chiller, stay clear of the danger area.
• The P030 Chiller must be properly secured in order to prevent it from tipping
over.
• The safety devices must not be deactivated.
• The electrotechnical connections of the P030 Chiller must be performed
according to and conforming to all relevant VDE, EN and. IEC standards. Beyond
that, the technical connection requirements of the local electrical utility company
have to be complied with.
• Always disconnect the power supply before working on the P030 Chiller.
Caution!
• Specific regional or national provisions applicable in the country where the unit
will be installed must be adhered to.
• The closed refrigeration circuit contains refrigerants and refrigeration oil. These
must be properly disposed of when performing service work or placing the unit
out of service (environment).
• The cooling water additives have a caustic effect on skin and eyes. When working
with cooling water additives, protective safety goggles and gloves must be worn.
Follow the directions on the product labels.
• Anyone working on the refrigeration circuit must be protected by personal
protective equipment.
• The P030 Chiller is to be used exclusively for the cooling of water and water-
glycol mixtures in accordance with predefined specifications.
Notice!
• Watch out for any incompatibilities of materials in the entire water circuit.
• The water must be free of all substances that could result in mineral deposits and
corrosion.
To Next Page
Loading...