Riello MULTI SENTRY MST 80 - CONTROL PANEL VIEW

CONTROL PANEL VIEW
Mains operation LED
 On steady: mains operation with good bypass line and synchronised inverter
 Flashing: mains operation with bad or disabled bypass line and/or non-synchronised inverter
 Flashing in standby: programmed restart function active and mains present
Battery operation LED
 On steady: battery operation
 Flashing: battery operation with early low battery or imminent shutdown warning
 Flashing in standby: programmed restart function active and mains absent
Load on bypass LED
 On steady: load powered from bypass line
Standby/alarm LED
 On steady: alarm present
 Flashing: standby mode
Replace batteries LED
 On steady: replace batteries
 Flashing: batteries overvoltage alarm
ECO mode LED
 On steady: ECO mode configuration active
Graphic display
F1, F2, F3, F4 = FUNCTION KEYS. Each key's task can be found on the lower part of the display and varies according
to menu.