Riello NXC 021 - Page 65

65
Installation
EN
NXC 017-021
• Open the machine protection using a screwdriver with
magnetictip,asindicatedinthegure,removethebag
andclosetheprotectionagain.
• Thedeviceissecuredtothepalletby4screws(twoatthe
front,andtwoattheback),whichmustberemoved.
A
B
 It is forbidden to disperse the packaging materials into
the environment or to leave them within the reach of
children, as they could pose a potential hazard. These
mustbedisposedofinaccordancewiththecurrentlegi-
slation.
For machine lifting operations refer to the gu-
res
below. For the NXH model pay attention to in-
sert the lift  forks in correspondence of the arrows A
oruseslotsBforliftingoperationswithslings.
NXC 026-040
NXH 026-040