Rigol DG2000 Series

RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
2-78
System Default
*Power-down Recall *Disabled
Display On
Error Array Clear Error
Storage State and any
No change
Trigger Default
Source Internal
Remote I/O Configuration Default
*GPIB Address *7
*I/O
*GPIB（IEEE－488）
*Baud Rate *9600 Baud
*Parity *No (8 bits)
The parameter with an asterisk（*）is stored in the Non-Volatile Memory.