EasyManuals Logo

Rigol DG2000 Series User Manual

Rigol DG2000 Series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
4-13
Point # lower limit=1.
When the user is editing the point, if the input number is less than 1, the system will
inform the user to start from point #1.
Currently on the last defined point.
When the user is about to edit the last defined point, this message will prompt.
Deviation cannot exceed Carrier Frequency.
The carrier Frequency should always be higher than or equal to the deviation
frequency.
Frequency Deviation lower limit = 5.0Hz.
Frequency deviation lower limit is 5.0Hz. If the specified Frequency deviation is lower
than 5.0Hz, the system will adjust the Frequency deviation to 5.0Hz automatically.
FM Frequency upper limit =20kHz
FM Frequency upper limit is 20kHz. If the specified FM Frequency is higher than 20kHz,
the system will adjust the FM Frequency to 20kHz automatically.
FM Frequency lower limit = 2mHz
FM Frequency lower limit is 2mHz. If the specified FM Frequency is lower than 2mHz,
the system will adjust the FM Frequency to 2mHz automatically.
Deviation plus Carrier cannot exceed maximum.
The sum of the Carrier frequency and the deviation frequency should be lower than or
equal to the selected maximum frequency plus 100kHz.
AM Depth upper limit = 120.0%.
The AM Depth upper limit is 120.0%. If the specified AM Depth is greater than
120.0%, the system will adjust the AM Depth to 120.0% automatically.
AM Depth lower limit = 0.0%.
The AM Depth lower limit is 0.0%. If the specified AM Depth is less than 0.0%, the
system will adjust the AM Depth to 0.0% automatically.
AM Frequency upper limit = 20kHz
The AM Frequency upper limit is 20kHz. If the specified AM Frequency is higher than
20kHz, the system will adjust the AM Frequency to 20kHz automatically.
AM Frequency lower limit = 2mHz
The AM Frequency lower limit is 2mHz. If the specified AM Frequency is lower than
2mHz, the system will adjust the AM Frequency to 2mHz automatically.
Hop Frequency upper limit = **
Different Source types have different Hop Frequency upper limit. If the Carrier is a
Square or Sine wave, the Hop Frequency upper limit is 400MHz; If the Carrier is a
Ramp wave, the Hop Frequency upper limit is 400kHz; If the Carrier is an Arb wave,
the Hop Frequency upper limit is 12MHz.
Hop Frequency lower limit = 1μHz

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Rigol DG2000 Series and is the answer not in the manual?

Rigol DG2000 Series Specifications

General IconGeneral
BrandRigol
ModelDG2000 Series
CategoryPortable Generator
LanguageEnglish

Related product manuals