RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG2000 Series
The Introduction of DG2000 Series
This manual covers the following four types of DG2000 Series Function/ Arbitrary
Waveform Generators: DG2041A、DG2021A.
RIGOL DG2000 Series Function/ Arbitrary Waveform Generator adopt the direct
digital synthesizer (DDS) technology, which can provide stable, high-precision, pure
and low distortion sine signal. It can also provide 40MHz square waveform with fast
rising and falling edges. Its combination of excellent system features, easiness in
usage and versatile functions makes this generator a perfect solution for your job now
and in the future.
DG2000 Series Function/ Arbitrary Waveform Generator have clear and simple
Front-Panel. The user-friendly panel layout and instructions, versatile terminals, direct
graph interface, built-in instructions and help system have greatly simplified the
operation process. Thus, users do not have to spend a great deal of time learning and
familiarizing the operation of the generator before they can use it proficiently. The
built-in AM, FM, PM, PWM and FSK modulating functions generate modulated
waveform at ease, without the help of a separate modulating source. The USB I/O,
LAN and GPIB are the standard configuration. Remote instructions meet the SCPI
specification requirements.
From the characteristics and specifications given below, you will understand how
DG2000 can satisfy your measurement requirements.
z 16+2 channels digital output module (optional) together with the analogue
channel can rebuild the most commonly used mixed signal in daily practice.
z DDS technology provides precise, stable and low distortion output signal.
z 10 standard waveforms:
Sine, Square, Ramp, Pulse, Noise, Sinc, Exponential Rise, Exponential Fall,
Cardiac and DC.
z 100MSa/s sampling rate, enable to edit arbitrary waveform with 14-bit, 512K
points.
z Frequency characteristics:
Sine/ Square: 1µHz to 40 MHz
Ramp: 1µHz to 400 kHz
To Next Page
Loading...
Need help?
General
