RIGOL
© 2006 RIGOL Technologies, Inc.
User’s Guide for DG2000 Series
I
Pulse: 500µHz to 16MHz
White Noise: 20MHz bandwidth (-3dB)
Arbitrary waveform: 1μHz to 12MHz
z Amplitude range: 2mV
pp to 10Vpp (50 Ω)
40mV
pp to 20Vpp (High Z)
z Abundant modulation function, various modulated waveform: AM, FM, PM, PWM
and FSK.
z Linear, logarithm Sweep and Burst mode.
z Abundant I/O: External Modulation Source, External 10 MHz Reference Input,
External trigger source, waveform output, synchronous digital signal output,
Internal 10 MHz Reference output.
z Support USB storage device; store and read waveform configure parameters or
the edited arbitrary waveform with USB devices. System Updating could also be
performed by using USB devices.
z Remote control is realized by using the LAN.
z Standard interface: USB Host & Device, RS-232, GPIB.
z Graph interface which shows the signal setting directly.
z Chinese/English user interface.
z Embedded Chinese/English Help System.
z Support Chinese/English Input.
Note:
All the specifications described in this guide are according to DG2041A, if you need to
know the particular specifications about the other type, please see “Specifications” in
Chapter 5.
To Next Page
Loading...
Need help?
General
