Rigol DG800 Series - Page 48

RIGOL Chapter 2 Front Panel Operations
2-18 DG800 User's Guide
Built-in Waveform
DG800 has 160 built-in arbitrary waveforms, as shown in Table 2-2
. In the arbitrary
waveform selection interface, tap the Engineering, Medical, AutoElec, or Maths
menu label to select the corresponding type. Tap or rotate the knob (pressing the
right arrow key will locate the cursor to the right of the interface) to select the
desired waveform (the selected waveform is highlighted). The waveforms under the
Common menu label are most frequently selected ones by users. At most, 8
waveforms can be stored.
Table 2-2 160 Built-in Arbitrary Waveforms
Type
Waveform
Remarks
Engineering
Sinc
Sinc function
Lorentz
Lorentz function
Log
Logarithm function and the base is 10
GausPul
Gauss pulse
NegRamp
Negative ramp
NPulse
Negative pulse
PPulse
Positive pulse
SineTra
Sine-Tra waveform
SineVer
Sine-Ver waveform
StairDn
Stair-down waveform
StairUD
Stair-up and stair-down waveform
StairUp
Stair-up waveform
Trapezia
Trapezia waveform
AmpALT
Gain oscillation curve
AttALT
Attenuation oscillation curve
RouHalf
RoundHalf Wave
RousPM
RoundsPM Waveform
BlaWave
Time-velocity curve of explosive
vibration
DampOsc
Time-displacement curve of damped
oscillation
SwigOsc
Kinetic energy- time curve of swing
oscillation
Dischar
Discharge curve of Ni-MH battery
Pahcur
Current waveform of DC brushless
motor
Combin
Combination function
SCR
SCR firing profile
Bworth
Butterworth filter
Chshev1
Chebyshev1 filter