RIGOL Chapter 1 Quick Start
User’s Guide for DM3068
2. Select a proper current input terminal according to the estimated current
magnitude before connecting the multimeter to AC power supply if you want
to use current measurement.
3. Only use 10 A and LO terminals for measurements when the AC+DC RMS
value of the current under measurement goes within 200 mA and 10 A.
Resistance Measurement (2-wire) Resistance Measurement (4-wire)
Capacitance Measurement
Continuity Measurement Diode Measurement
+
2WR
+
4WR
+
Capacitance
Open or
Closed Circuit
Diode
To Next Page
Loading...
