Chapter 1 Quick Start RIGOL
User’s Guide for DM3068
Measurement Connections
DM3068 is designed with many measurement functions. After selecting the desired
measurement function, please connect the signal (device) under test to the
multimeter according to the method below. Do not discretionarily switch the
measurement function when measuring as it may cause damage to the multimeter.
For example, when the test leads are connected to the related current terminals,
AC voltage measurement should not be taken.
DCV Measurement ACV Measurement
DCI/ACI Measurement (Small Current) DCI/ACI Measurement (Large Current)
Note: in order to protect the multimeter, please execute DC/AC current
measurement following the requirements below.
1. Do not connect the 10 A and LO Sense/200 mA input terminals into the
current measuring circuit at the same time.
+
DCV
+
ACV
DCI/ACI +
To Next Page
Loading...
