RIGOL Chapter 2 Front Panel Operations
User’s Guide for DM3068
5. Read the measurement value
The multimeter measures the input signal according to the current
measurement settings and displays the value on the screen. Besides, the
multimeter can measure the voltage or current of the signal during the
frequency/period measurement. Press
or and then press and
respectively; the measurement results are as shown in the figures below.
6. Make math operation (advanced)
Users can perform math operation (STA, P/F and REL) on each measurement
reading. For REL operation, the multimeter subtracts the pre-specified value
of REL from the actual measurement result and displays the result. For details,
please refer to “Math Operations”.
7. View history data
Up to 5000 latest measured data can be viewed. Press History to enter the
following interfaces.
Press Info and use the up and down direction keys to view the
measurement item, measurement range, number of values, maximum,
minimum, average and standard deviation.
Press List and use the up and down direction keys or the menu softkeys
to view all the measurement results before the last update in table form.
To Next Page
Loading...
