Rigol DM3068

RIGOL Chapter 2 Front Panel Operations
User’s Guide for DM3068
2-32
Press Save and enter a desired file name by referring to “Name/File
Name Input Method”, such as “Sens1”.
When finished, press Done to save the current sensor configuration into
the internal memory (C:\) or external USB storage device (A:\) with the
specified filename.
Press and returns to User interface.
 Press Apply, the multimeter starts measuring according to the current
configurations. As shown in the figure below, the
shown on the
screen indicates that the result is unreliable.
If you suspect the stored any sensor configuration files or data, press Edit to
make a modification.