Rigol DS1000CA Series - Page 19

Programming Introduction RIGOL
Programming Guide for DS1000CA Series
2-7
1. :ACQuire:TYPE
Command Format:
:ACQuire:TYPE <type>
:ACQuire:TYPE?
Function Explanation:
The commands are used to set and query the current acquisition type. The
options of <type> are: “NORMal”, “AVERage” and “PEAKdetec”.
Returned Format:
Query returns “NORMAL”, “AVERAGE” or “PEAKDETECT”.
Example:
:ACQ:TYPE AVER Set the acquisition type as “AVERage”
:ACQ:TYPE? Query returns “AVERAGE”
2. :ACQuire:MODE
Command Format:
:ACQuire:MODE <mode>
:ACQuire:MODE?
Function Explanation:
The commands are used to set and query the current acquisition mode. The
options of <mode> are “RTIMe” and “ETIMe”.
Returned Format:
Query returns “REAL_TIME” or “EQUAL_TIME”.
Example:
:ACQ:MODE ETIM Set the acquisition mode as “ETIMe”
:ACQ:MODE? Query returns “EQUAL_TIME”
3. :ACQuire:AVERages
Command Format: