Rigol DS1000CA Series - Page 20

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-8
:ACQuire:AVERages <count>
:ACQuire:AVERages?
Function Explanation:
The commands are used to set and query the average acquisition time. The
range of <count> is form 2 to 256 at 2 times the power of N.
Returned Format:
Query returns 2, 4, 8, 16, 32, 64, 128 or 256.
Example:
:ACQ:AVER 16 Set average acquisition time as 16
:ACQ:AVER? Query returns 16
4. :ACQuire:SAMPlingrate?
Query Format:
:ACQuire:SAMPlingrate? CHANnel<n>
Function Explanation:
The commands are used to query the sampling rate of the current channel.
<n> could be 1 or 2 which means channel 1 or channel 2.
Returned Format:
Query returns the value of the sampling rate.
Example:
:ACQ:SAMP? CHAN2 Query the smpling rate of channel2
1.250e+08 Query returns 125Msa/s