Rigol DS1000CA Series - Page 92

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-80
:CURSor:MANUal:SOURce <source>
:CURSor:MANUal:SOURce?
Function Explanation:
The commands are used to set and query the source used in manual mode.
The options of <source> are “CHANnel1”, “CHANnel2” or “MATH”.
Returned Format:
Query returns CHANnel1, CHANnel2 or MATH.
Example:
:CURS:MANU:SOUR CHAN1 Set the source as “CHANnel1”
:CURS:MANU:SOUR? Query returns CHANnel1
4. :CURSor:MANUal:CURAX
Command Format:
:CURSor:MANUal:CURAX <value>
:CURSor:MANUal:CURAX?
Function Explanation:
The commands are used to set and query the position of cursor AX in manual
mode. The range of <value> is 4~297.
Returned Format：
Query returns the set value of <value>.
Example:
:CURS:MANU:CURAX 100 Set position of cursor AX as 100
:CURS:MANU:CURAX? Query returns 100
5. :CURSor:MANUal:CURAY
Command Format:
:CURSor:MANUal:CURAY <value>
:CURSor:MANUal:CURAY?