Rigol DS1000CA Series - Page 96

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-84
Returned Format:
Query returns position of cursor B.
Example:
:CURS:TRAC:CURB 100 Set position of cursor B as 100
:CURS:TRAC:CURB? Query returns 100
12. :CURSor:TRACk:CURAY?
Command Format:
:CURSor:TRACk:CURAY?
Function Explanation:
This command is used to query the position of cursor AY in track mode.
Returned Format:
Query returns the position of cursor AY within 4~194.
13. :CURSor:TRACk:CURBY?
Command Format:
:CURSor:TRACk:CURBY?
Function Explanation:
This command is used to set and query the position of cursor BY in track
mode.
Returned Format:
Query returns position of cursoe BY within 4~194.