Rigol DS1000CA Series Programming Guide

RIGOL Programming Introduction
Programming Guide for DS1000CA Series
2-86
1. :INFO:LANGuage
Command Format:
:INFO:LANGuage <lang>
:INFO:LANGuage?
Function Explanation:
The commands are used to set and query the system language. The options
of <lang> are “SIMPlifiedchinese”, “TRADitionalchinese”, “ENGLish”,
“KORean”, “JAPanese”, “FRENch”, “GERMan”, “RUSSian”, “SPANish” or
“PORTuguese”.
Returned Format:
Query returns the set value of <lang>：Simplified Chinese, Traditional Chinese,
English, Korean, Japanese, French, German, Russian, Spanish or Portuguese.
Example:
:INFO:LANG SIMP Set the system language as “SIMPlifiedchinese”
:INFO:LANG? Query returns Simplified Chinese
2. :COUNter:ENABle
Command Format:
:COUNter:ENABle {ON|OFF}
:COUNter:ENABle?
Function Explanation:
The commands are used to set and query the frequency counter function”ON”
or “OFF”.
Returned Format:
Query returns “ON” or “OFF”.
Example:
:COUN:ENAB ON Set the frequency counter function ”ON”
:COUN:ENAB? Query returns “ON”

Rigol DS1000CA Series Specifications

General

Brand	Rigol
Model	DS1000CA Series
Category	Test Equipment
Language	English