Rigol DS1104Z Manual

Chapter 1 Disassemble and Assemble RIGOL
MSO1000Z/DS1000Z Service Guide 1-13
Assemble Procedures
The assemble procedures are the reverse of the disassemble procedures. Check
whether the cables are correctly connected and whether all the screws are installed
after each step of assemble.
You are recommended to follow the order and methods introduced above
when disassembling and assembling the instrument to avoid damage to
the instrument due to improper operation and to save your time.

Rigol DS1104Z Specifications

General

Bandwidth	100 MHz
Channels	4
Sample Rate	1 GSa/s
Waveform Capture Rate	30, 000 wfms/s
Vertical Sensitivity	1 mV/div to 10 V/div
Time Base Range	5 ns/div to 50 s/div
Vertical Resolution	8 bits
Interface	USB Host, USB Device, LAN, AUX
Display	7 inch TFT LCD (800 x 480)
Trigger Types	Edge, Pulse, Video, Slope
Power Supply	100-240 V, 45-440 Hz
Memory Depth	24 Mpts (Single Channel), 12 Mpts (Dual Channel)