Rigol M300 - Control

RIGOL
M300 Quick Guide
21
Control
MC3065
MC3164
MC3264
MC3132
MC3232
MC3324
DMM module, con not be controlled
Single-ended Multiplexer module:
(1) Disconnect the channel selected
(2) Close the channel selected
(3) Read the measurement value of the channel
selected
(4) Module reset
Multiplexer Module:
(1) Disconnect the channel selected
(2) Close the channel selected
(3) Read the measurement value of the channel
selected
(4) Module reset
(5) Bank Joined: used for 2-wire measurement
(6) Bank Separate: used for 4-wire measurement
MC3416
MC3648
Actuator/Matrix Switch:
(1) Disconnect the channel selected
(2) Close the channel selected
(3) Module reset
MC3534
Multifunction Module:
(1) DIO channel:
Read the input value of the channel selected;
Edit the output value of the channel selected
(2) TOT channel:
Read the count of the channel selected;
Start or stop counting
(3) DAC channel: edit the output value of the
channel selected
(4) Module reset