Document Overview
This manual introduces the front and rear panels, the user interface and the basic
measurement method of M300 Data Acquisition/Switch System briefly and guides
users to be familiar with the instrument quickly. For more detailed information,
please refer to the User’s Guide.
Quick Start
This section provides the basic information about the front and rear panels, the user
interface and the plug-in modules.
General Inspection
1. Inspect the shipping container for damage
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the instrument has
passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to instrument resulting
from shipment. RIGOL would not be responsible for free maintenance/rework
or replacement of the unit.
2. Inspect the instrument
In case of any damage, or defect, or failure, notify your RIGOL sales
representative.
3. Check the accessories
Please check the accessories according to the packing lists. If the accessories
are incomplete or damaged, please contact your RIGOL sales representative.
To Next Page
Loading...
