RIGOL Chapter 14 Store and Recall
14-6 MSO1000Z/DS1000Z User’s Guide
Disk Management
Press Storage DiskManage to turn on the disk management interface as shown
in Figure 14-1 and use to select the desired disk. The disk currently selected is
displayed in blue shading. Press down
to open the disk selected.
Execute the following operations through the disk management menu:
To Select File Type
To Create a New File or Folder
To Delete a File or Folder
To Rename a File or Folder
To Clear the Local Memory
Figure 14-1 Disk Management Interface
To Select File Type
Except the file types in Storage, the oscilloscope can also display, save or read some
files for advanced applications such as mask file of the Pass/Fail test (*.pf),
waveform record file (*.rec), upgrade file (.gel) and reference waveform file (*.ref),
etc.
Press Storage DiskManage File Type to select the desired file type. The
default is “*.*”. Under the current directory, only files of which the suffix of the file
name matches with the file type selected will be displayed in the current disk.
To Next Page
Loading...
