Chapter 1 Disassembly and Assembly RIGOL
MSO5000-E Service Guide 1-7
Disassemble the Fan
Figure 1-5 Disassemble the Fan
Part Description:
① 4 screws (PTF5x10 torx flat countersunk head self-tapping screw, used for fastening the fan)
Disassembly Steps:
1. Use the T10 screwdriver to remove 4 screws (①) that secure the fan.
2. Remove the fan from the metal rear panel components gently.
Tip
When disassembling the fan, pay attention to the installation position of the fan and the direction
of the fan cable outlet to avoid any improper assembly operation.
①
①
①
①
To Next Page
Loading...
