Rigol MSO5000-E Series

To Next Page

To Previous Page

Chapter 1 Disassembly and Assembly RIGOL

MSO5000-E Service Guide 1-9

Disassemble the Panel

Figure 1-7 Disassemble the Panel

Part Description:

① 6 screws (M3x8 torx pan head combination screw, used for fastening the panel and the metal front

panel)

Disassembly Steps:

1. Use the T10 screwdriver to remove 6 screws (①) that secure the panel and the metal front panel.

2. Lift the panel from the left side and remove it.

3. Take off the panel gently.

①

Other manuals for Rigol MSO5000-E Series