Mercury Racing 2.5L ECM
Page 42
3) Connect the 94013 adapter to the data connector.
4) Connect the scan tool to the adapter’s round DIN connector.
5) Standing clear of all engine components, turn the engine’s ignition switch
ON.
Obtaining Data
Aer the scan tool displays its initial opening messages use the ▲ and ▼ keys
to display the “Mercury Outboards” operating mode from the main menu then
press the YES key to select it.
Next, select “2.5L Hi Perf ECM” and then choose “ECM Data” to begin reading
information from the ECM. Use the ▲ and ▼ keys to scroll through the
available engine data and sensor status information.
Disconnecting the Scan Tool
Shut the engine’s ignition switch OFF. Disconnect the scan tool adapter from the
ECM’s data link connector.
To Next Page
Loading...