Risco Agility - 2.3 Sending a Panic Alarm

AgilityUserManual 
Page 17
2.3 Sending a Panic Alarm
Panicalarmsenableyoutosendamessagetothemonitoringstationintheeventofan
emergency,sendamessagetoafollowmenumber,announcealocalmessageoractivatea
localalarm.Panicalarmscanbesettobesilent(Refertoyourinstallerformore
information).
TosendaPanic
Alarmusing
Procedure
Pressboth and keyssimultaneously

Pressboth and keyssimultaneously
Note:Yourinstallershoulddefinethesekeystobesetaspanickeys.Thesekeys
canbeeitherdisabledorusedtoestablishaservicecalltoyour
MonitoringStation.
Ifdefinedbyyourinstallerpressing simultaneouslyfor2
secondswillsendafirealarmandpressing simultaneously
for2secondswillsendaspecialemergencyormedicalalarm.

Pressthesmallblankbutton(ifdefined)
Note:Yourinstallercandefinethesmallblankbuttontobeusedforsendinga
panicalarm.
Note:Forfullcapabilitiesofthe2‐wayremotecontrol,thebi‐directionalkeypadand4buttonkeyfob,
refertotheinstructionssuppliedwitheachproduct.
Pressbothkeyssimultaneously
Pressthepanicbutton