Risco Agility - Setting and Changing User Codes; Deleting User Codes

 AgilityUserManual
Page 24
Setting / Changing User Codes
TheuserassignedtheGrandMasterauthoritylevelcanchangeallusercodesbutcannot
viewthedigitsintheusercodefields.Userswithotherauthoritylevelscanonlychange
theirowncodes.Thesystemmustbedisarmedinordertosetorchangeusercodes.
Toset/changeauser
code:
1. Press
and
2. Enteryourcode
3. Usingthearrowkeys,scrolltotheoptionCodes/Tagsandpress
.
Note:Ifyouenterawrongusercode,thekeypadproduces3shortbeepsandtheʺWrongCode.PleaseTry
Againʺmessagewillbeheard.Press quicklyandre‐entertheabovesequencecorrectly.
4. ScrolltoUserCodesandpress .
5. YouwillseetheoptionNew/Change.Press

6. UsingthearrowsscrolltoselecttheUserIndexnumbertowhichyouwantto
assignausercodeandpress
.
Note:IntheAgilitysystem,theUserIndexnumberisfrom00to32,where00belongstotheGrandMaster.
7. Enterthenewcodeandthenre‐enterthecode.Ifsuccessful,asingle
confirmationbeepissounded,ifnot,3quickerrorbeepsaresounded
8. Repeattheabovestepsforadditionalcodesuntilyouhavecompletedyourlist
Deleting User Codes
Attimes,youmaywanttocompletelydeleteausercode.Notethatitisimpossibleto
deletetheMasterCode(althoughitcanbechanged).
Thesystemmustbedisarmedinordertodeleteusercodes.
Toset/changeausercode:
1. Followsteps1‐4ofthepreviousprocedure
(SeeSetting/ChangingUserCodes)
2. ScrollthemenutotheoptionʺDeleteByUserʺ.Press 
3. UsingthearrowsscrolltoselecttheUserIndexnumberwhichyouwantto
deleteandpress
.
4. Thedisplaywillshow:ʺDeleteUser.Areyousure?ʺ.Usethe keytoselect
[Y]andpress
.Ifsuccessful,asingleconfirmationbeepissounded,ifnot,3
quickerrorbeepsaresounded
5. Repeattheabovestepsfordeletingadditionalcodes